Select Page

Rugged construction Design “MD” Buckets are most preferred for common function elevators. Covering a wide choice of sizes from 4 to 20 inches lengthy, they are employed for ?ne and medium size components this kind of as coal, cement, pulp, grain, ear corn, and so forth. They’re extensively employed for hefty abrasive materials this kind of as sand, gravel, and stone. Reinforced front lips give Fashion “MD” Buckets an extended wearing digging edge. Uniform wall thickness and powerful corner reinforcement make them more powerful than steel buckets with the very same gauge.They’re smoothly surfaced and have ends sloped inward at 6 degree angles to insure proper ?lling and clean discharge. Accessible in Malleable and Al-lied-Locke Promal.
Chain for which buckets can be found in-clude: Steel Bushed Roller, Steel Bushed, Combination, “H” Class Mill, 400 Class Pin-tle, and 700 Class Pintle. “MD” Buckets are utilized with G1, G6, K1, or K2 fashion attach-ments when they can be found within the chain type.
Capacities are for buckets ?lled to the line XX (see diagram). The useful operating capacity will differ with all the loading circumstances, angle of re-pose of the material becoming handled, and also the incli-nation on the elevator.
Style “AC” ELEVATOR BUCKETS for handling cement, lime, and ?uffy products
Type “AC” Buckets supply rapidly, thorough discharge of cement, lime, and various dry, ?uffy components. Vent holes from the bottom of each bucket release trapped air in ?lling and make it possible for material to empty from bucket swiftly and totally on discharge. In addition to reinforcing lips, hooded backs reinforce “AC” Style Buckets. This function permits closer bucket spacing and offers 30% better carrying capacity than other bucket types with the very same length. These sturdy buckets have an additional thickness of metal at wear points for longer support. Readily available in Al-lied-Locke Malleable and Promal.
Type “AC” Buckets are generally made use of with hefty duty engineering chain this kind of as Bushed Steel Chain with K2 and K3 fashion attachments.
Capacities are for buckets ?lled to both line XX or YY (see diagram). The useful operat-ing capacity will fluctuate with loading problems, angle of repose in the material getting dealt with, and also the inclination of the elevator.