Select Page

Downsizing Your Technique with Larger Electrical power Chains
HK style roller chains conform to H style of ANSI, and their thickness of inner and outer hyperlink plates are equal to individuals of the up coming more substantial dimension chain. For that reason, HK type roller chains are greater in tensile strength by about 20%and in optimum allowable load by about 15% than these of standard roller chains. Because the weight on the chains can be more substantial, HK kind roller chains are suitable for your application of heavy duty at lower velocity.
Encouraged utilizes
?Optimal for places in which higher strength is required but substantial and heavier chains cannot be employed.
Selection of chains
Decide on a appropriate HK form roller chain based upon “Low-speed selection”
For your greatest allowable load, see the following table of dimensions.
HK type roller chains are available as much as triplex.
Sprockets
Use standard sprockets for a simplex HK roller chain Since the transverse pitches are greater than these of conventional chains inside the situation of duplex or triplex, typical sprockets are not able to be applied. Refer to the sprocket tooth profiles for HK
Connecting hyperlink and offset website link
The tensile power of connecting back links and offset links are listed on the left, however the greatest allowable load is reduce than that with the base chain. Please talk to us should you may have any queries. It truly is advisable to utilize the connecting website link of interference-fitted (FJ, HJ)
Never make the holes from the connecting plate bigger and hardly ever make the pins thinner to facilitate the function for fitting the pins into the connecting plate, considering that otherwise the fatigue power is going to be lowered.
Choice of chains
Decide on a correct HK type roller chain based upon “Low-speed selection”
For your highest allowable load, see the next table of dimensions.
HK sort roller chains can be found as much as triplex.
Sprockets
Use typical sprockets to get a simplex HK roller chain Because the transverse pitches are larger than those of typical chains during the case of duplex or triplex, common sprockets cannot be utilised. Refer to the sprocket tooth profiles for HK
Connecting hyperlink and offset website link
The tensile strength of connecting backlinks and offset backlinks are listed over the left, however the greatest allowable load is reduced than that of your base chain. Please talk to us should really you have any queries. It can be proposed to implement the connecting link of interference-fitted (FJ, HJ)
Never ever make the holes in the connecting plate larger and never make the pins thinner to facilitate the get the job done for fitting the pins to the connecting plate, because otherwise the fatigue strength will be lowered.